Amplate Raised Rim Thin Wall PCR Plates
These plates offer the right alternative to existing Robbins, Corning and Perkin Elmer models. T323-100 and 101 Series have a 3 mm raised rim around each tube well.
$233.00
Made of polypropylene ]
Amplate™ Raised Rim thin wall PCR plates are the latest addition to the wide range of Simport PCR products. Offering just the right rigidity for automation, these three 96-well plates, made in a standard 8 x 12 configuration, are perfectly suited for high performance thermal cycling. Each well makes intimate contact with the heating block while quick and consistent heat transfer is ensured by a uniform wall thickness. Using a special polypropylene, samples are easily recovered thanks to a low adhesion surface. Plates on all models can be cut in strips of 16 wells (2 x 8). Well capacity: T323-100 and -101 Series: 250 µl, T323-103 Series: 200 µL
These plates offer the right alternative to existing Robbins, Corning and Perkin Elmer models. T323-100 and 101 Series have a 3 mm raised rim around each tube well.
The latter is supplied with a wide skirt extending over and under the plate on which a bar code can be affixed to facilitate identification. Series T323-103 will also offer the same skirt but the rim above each tube well is only 1 mm high.
All sealing methods can be used for oil-free operation: domed and flat cap strips (T321 Series); SecureSeal™ Thermal Sealing Film (T329-1); SecureSeal™ Aluminium Sealing Foil (T329-5) and Amplate™ Mat (T329-10). However Series T323-103 will accommodate micromats only. To facilitate orientation, one corner of the plate is cut away. An alphanumeric grid helps sample identification.
Available colorless and in four pastel colors.
Autoclavable.
Packed in tamperproof resealable bags of ten plates.
